# GATE2014-2-33

53 votes
11.3k views

A computer has twenty physical page frames which contain pages numbered $101$ through $120$. Now a program accesses the pages numbered $\text{1, 2, ..., 100}$ in that order, and repeats the access sequence THRICE. Which one of the following page replacement policies experiences the same number of page faults as the optimal page replacement policy for this program?

1. Least-recently-used
2. First-in-first-out
3. Last-in-first-out
4. Most-recently-used

edited
3
Why we can't consider Last In First Out ?

Each time it will replace the most recent frame only like MRU, so how option D is more appropriate than option C ?
2

For other readers please read @Shreya Roy's comment for getting difference between LIFO and MRU.

1
How  many Page fault will occur?
3

I think there would be

Optimal: 260-page fault

MRU: 260-page fault

LIFO: 262-page fault

NOTE (if reference string has 300-page request i.e 1 2 .... 100 1 2 .... 100 1 2 .... 100 and demand paging is used)

2
I think in MRU  when 1st page is arrived then it  replace  101 or any of 101 .....120 .Then when the 2nd page comes then it will replace 1St page ,,isnt as it is used most recent.Then how optimal page replacement algorithm is same as MRU . I think no option is correct.correct me if i am wrong.
0
what if in in the second round access is reverse means 100 to 1

then the answer for the same question would  be FIFO or not ?

please confirm.
0
I have the same doubt!
1

@Arjun sir, here all the answers have made the assumption that for MRU the pages 101 to 120 will be swaped out. Can we make assumptions like this in exam? Because in this case Optimal will not behave exactly like MRU, and the reason is the twenty pages that were already loaded. Please note here I have taken the sequence as 1,2,3,.....99,100,1,2,3......99,100,1,2,3.....99,100.

Please correct me if I am wrong, according to my calculations, in Optimal we will get 40/300 page hit rate, and in MRU we will get 0/300 Page Hit Rate.

I know MRU and Optimal work exactly same when the sequence is in a loop but in this question, the twenty frames are already loaded and that is what is making the difference.

## 10 Answers

56 votes

Best answer

It will be (D) i.e Most-recently-used.

To be clear "repeats the access sequence THRICE" means totally the sequence of page numbers are accessed $4$ times though this is not important for the answer here.

If we go optimal page replacement algorithm it replaces the page which will be least used in near future.

Now we have frame size $20$ and reference string is

$$1, 2, \dots, 100,1, 2, \dots, 100,1, 2, \dots, 100, 1, 2, \dots, 100$$

First $20$ accesses will cause page faults - the initial pages are no longer used and hence optimal page replacement replaces them first. Now, for page $21$, according  to reference string page 1 will be used again after $100$ and similarly $2$ will be used after $1$ so, on and so the least likely to be used page in future is page $20$. So, for $21^{st}$ reference page $20$ will be replaced and then for $22^{nd}$ page reference, page 21 will be replaced and so on which is MOST RECENTLY USED page replacement policy.

PS: Even for Most Recently Used page replacement at first all empty (invalid) pages frames are replaced and then only most recently used ones are replaced.

edited by
0
Q 2014 2_33  all give same page faults which is 400 and optimal page replacement gives 100+(100-19)+(100-19)+(100-19) .=343.  In first sequence from 1 to 19 and 100  why not considering 100 page as no page fault . ie why 19  why not 20
0
See the answer now..
0
As per the question 20 physical frames contain pages from 101 to 120 .Thus in total 120pagess.How is that possible?It means one physical frame contain 6 pages of the program. But as far i know one physical frame is equal to one page.

if that the case in that why not pages numbered 1 to 100(100 pages) are accommodated in those 20 frames which can contain up to 120 pages.it can easily accommodate there:?
4
why have we not considered them unnecessary in LIFO case?? I dont understand this assumption based questions. Why do they make only such questions. Cant they be bit clear with the question?? will it hurt them??,
0
@Arjun Sir, you said that non refrenced removed first in MRU. Is it the same case in LIFO or LIFO will have 400 faults???
2
optimal page replacement and MRU will give 100+(100-20)+(100-20)+(100-20) .=340 misses  where as LIFO will give  100+(100-19)+(100-19)+(100-19) .=343 misses.
0
can u explain why?
1
you must have assumed 101-120 initial frames as invalid then only 343 can come. well i think this question is a bit ambiguous. More of assumption
46
1 2 3 ---19 20 now 20 gets popped out 21 ,21 gets popped out 22 so at the end of ist round we have 1 2 3 4 --19 100, now 1 to 19 hit ,20 will replace 19 not the hundred (here is the difference from LIFO),so upto 99 we get miss but at 100 again hit so total 20 hit in 2nd round . and frames present are 1 2 3 4........18 99 100, so in 3rd round upto 18 no miss now 19 will replace 18 so again will get a hit at the time of accessing 99 and 100 so again 20 hits ,similarly in 4th round 1 .....17 98 99 100present so 1 to 17 hit and again in 98 ,99,100 we will get hit.. So total 60 hits ..
2
thanx. but again we have to assume that 100-120 are invalid frames otherwise we wont get the hits.
3
yes that we have assumed..
1
Your answer is correct and you should answer this question as a separate answer not as a reply to an answer.
1

@Shreya Roy ji Thank You. :)

0

But does the number of page faults for LIFO and MRU differ here?

Arjun yes sir in Case of LIFO Page Fault is  343 (20+80+81+81+81). where as in case of Optimal and MRU its 340.

0
Lifo case :-

still the last in was 100 since it was last inserted, others (next 1 to 19) are just touched means accessed not inserted and lifo means last in first out

so i feel for the placement of 20 in second time element naming 100 will be choosen

@arjun sir please confirm
1

@sushmita

@Arjun

I believe MRU is not same as Optimal here. For MRU I am getting 400 pagefaults as at same place all pages are replaced. While in Optimal we get 343 pagefaults.

Please correct me, if i am wrong.
Should I assume 101-120 as invalid

0
Should I assume 101-120 as invalid

yes you have to assume that.
0
What difference LIFO makes ?? Plz explain
0

@Arjun sir,

Actually in MRU non referenced frames are replaced first and then only MRU ones thus making it optimal here

Any reference to this claim? I couldn't find anywhere.

Maybe the process started by using 101 to 120 pages and after that it accessed 1 to 100 repeatedly. Maybe pages 101 to 120 were pre-paged (pre-paging used instead of pure demand paging.)

I am not concerned about "which option to select" .. Only concerned about correct concept.

0

@Deepakk Poonia (Dee)

I think the statement made by @Arjun is incorrect. Non-referred frames will not be the recent ones used for sure and hence not replaced in MRU.

26 votes

The optimal page replacement algorithm swaps out the page whose next use will occur farthest in the future. In the given question, the computer has 20 page frames and initially page frames are filled with pages numbered from 101 to 120. Then program accesses the pages numbered 1, 2, …, 100 in that order, and repeats the access sequence THRICE. The first 20 accesses to pages from 1 to 20 would definitely cause page fault. When 21st is accessed, there is another page fault. The page swapped out would be 20 because 20 is going to be accessed farthest in future. When 22nd is accessed, 21st is going to go out as it is going to be the farthest in future. The above optimal page replacement algorithm actually works as most recently used in this case. As a side note, the first 100 would cause 100 page faults, next 100 would cause 81 page faults (1 to 19 would never be removed), the last 100 would also cause 81 page faults.

1
Thank you for this short and nice explanation! :)
0

@Regina Phalange +2 likes for this short explanation.

1

As a side note, the first 100 would cause 100 page faults, next 100 would cause 81 page faults (1 to 19 would never be removed), the last 100 would also cause 81 page faults.

First 100 would cause 100 page faults, and every next 100 would cause 80 page faults.

0

How come for the next 100 there will be 80-page faults? As the frame will contain 1,2,3..........19,100 after the first sequence and again for the sequence 1,2,3.......100 the first 19 will be a hit.

EDIT:- Sorry my fault I wasn't considering 100 to be a hit , so there will be 80-page faults. And one more question do we have to consider the sequence 3 times or 4 times? ( Even though it won't  make any difference in the answer)

0
How do we get 20 hits? we get 19 hits in the second round(from 1-19), then 20 will replace 100, 21 will replace 20 and so on again till 100. How is 100 considered a hit in this sequence. I can't figure this out. Please explain
0

@Rishav_Bhatt replying too late .... But i think you had also considered "repeat the access sequence thrice" means sequence of page numbers are accessed 4 times.

0

After the first round the sequence we will be having is 1,2,3,4.............19,100. 100 will be placed in the last frame as 20 will be replaced by 21, then 21 with 22 and so on till 100. Now when the second sequence starts till 1-19 there will be a hit now 20 will now be replaced with 19 as 19 is the will be not used for the longest time, similarly 20 by 21 till 99. Now when in the second sequence we come across 100 it will be a hit. Hence in the second sequence, we get 20 hits

9 votes

The optimal algorithm gives 340 page faults(assuming 3 sequences from 1-100):

We have 20 frames containing 20 pages:  101, 102, 103, 104.....120. Since these pages are never referred again in future, we will replace them all. So, we now have 1, 2, 3, .... 17, 18, 19, 20 in the frames. 20 would not be used for the longest duration, so we remove 20 and load 21. Repeating this till we reach 100.

Now, we have 1, 2, 3,... 17, 18 , 19, 100. In second repetition we get 19 hits (for 1-19). Now 100 is needed in this repetition but 19 in next.

(1, 2, 3, 4, .... 19, 20,.... 99, 100  | 1, 2, 3,... 19, 20, 100)

So removing 19 and loading 20th page. At this instance main memory has

1, 2, 3, .... 20, ... 99, 100

20 is the best candidate to remove because it'd be needed later than the rest (like 1 , 2, 3...) in next iteration. So removing 20 and loading 21. Again to accommodate 22, 21 is best candidate to be removed. Repeating this process, we reach 100, which is already present in memory. So total hits become 20. Before the next repetition, main memory has

1, 2, 3, ...18, 99, 100

At the beginning, there would be total 18 hits. Since we need 99 and 100 in this iteration, 18 shall be removed, followed by 19, 20.... till 98. So at the end, again we have 20 hits. In the third iteration too, 17 shall be replaced, 98, 99, 100 already found in main memory, summing up the total hits to 20. So total page faults with optimal algorithm are 100+(100-20)+(100-20)+(100-20)=340

This clearly is MRU or most recently used where the latest referred page gets removed. For eg, in first iteration, since 19 was referred last, we removed it. But the frames were not empty at the beginning. Only optimal algorithm looks at the future demands and decides the best course, all the other algorithms make decisions based on previous entries. Hence neither MRU nor LIFO would eliminate all the 20 entries 101, 102, .... 120.

In fact MRU and LIFO in such circumstances would yield same results because they would keep replacing the last entry and perform worst. Thus to answer, we must assume the frames as empty, in which case MRU would better LIFO (because LIFO would remove the last entered page such as 100, thus reducing hits by 1.)

0
great answer.

FIFO=LRU=400 page faults

MRU=optimal=340 pf

LIFO=343 pf
1
If there are 300 pages given(1 to 100, 1 to 100, 1 to 100)..then how page faults occur more than 340 ?
7 votes

The page frame access sequence is

1,2,3.......19,20,21.....99,100,
1,2,3.......19,20,21.....99,100,
1,2,3.......19,20,21.....99,100,
1,2,3.......19,20,21.....99,100,

Using OPTIMAL replacement method from first 1....100 , first 20 page fault will take place as there are no common pages ,,from 21 to 100 again page fault will take place (these page fault will be equivalent to using MRU replacement method ). after these replacement the page frames will contain [1.....19,100] no pages .Considering the next sequence,no page fault from 1 to 19 and at the 20 page no ,19 will get replaced from the page frame and in the further sequence till 99 there will be page fault(these will be equivalent to using MRU ) and the resulting pages in frames will be 1...18 ,99,100 . going through the further sequence we will get the total page fault as 260 ......... replacing the pages using optimal method is equivalent to MRU replacement method thus answer (D)

0

which contain pages numbered 101 through 120

Now for page access 1, one of the frame gets replaced and the most recently used frame becomes 1. So, during the next access to page numbered 2, shouldn't page 1 be replaced as per MRU policy?

0
hm yes sir ,i didnt consider that :(
1
Actually yo are correct. Pages 101-120 are not referenced by the current process. So, they are replaced first even with MRU policy.
0
arjun sir i am getting the same no of page faults for LIFO also. LIFO will also behave as MRU after the frames 1-20 are present in the frames. please clear this huge doubt.

And as you are saying- " Pages 101-120 are not referenced by the current process. So, they are replaced first even with MRU policy." Isnt it the case for LIFO too????
3
problem with LIFO is :

initially we had 101 ,102,....120 when we load frame no1 then last in was 120 and 1 replaced in 120 ,then when frame 2 come last used was frame 1 again frame 1 replaced, subsequently in the same page frame(i.e 10th frame) we have to replace all the 300 next pages. so number of miss will be 300. but in optimal we have 260 missed. as explained above by arjun sir.
0
Sir, how can MRU policy replace the pages that aren't in it's sequence? MRU derives which pages to remove only from it's own sequence.
7 votes
Here the options are wrong no option will be matched.
0
@spider 1896

@tamojeet Chatterjee i am agree with both of you

They shouldn't mention the pages 101 ...to 120 in the frames

If the frames would be remain empty then we can approach this

But for this question i am also getting 300 page faults for all options.

If any one says i am wrong provide me the reason
7 votes

Correct Answer is MRU. Let's see how

we can convert this problem to 3 pages and 5 page accesses which is accessed 3 times (you can access any no. of times above 2 it does not matter) because ratio of page fault will be same.

Note- Whenever there is repeated sequence like 12345 12345 then optimal convert itself into MRU & whenever there is reverse sequence like12345 54321 then optimal convert itself into LRU.

edited
0

@Nitesh Singh 2 Yes bro if we get this idea that "fault rate ratio will be similar",we can save lot of time in exam.But here given like initally 101 to 120 numbered pages are there,so doubt is which one to consider MRU page among them?If we consider like last page 120,then all the faults will occur at 120 for every page since we are not using any other page as per MRU.Then it boiled down to page replacement with no of frames=1.So it should have 300 faults right? Then how  will it be equal with optimal?

5 votes
OPTIMAL will take 340 ( 100 +80+80+80 ) page faults.

FIFO will take 400( 100 +100+100+100 ) page faults.

LRU will take 400( 100 +100+100+100 ) page faults.

MRU will take 340( 100 +80+80+80 ) page faults.

LIFO will take 343 ( 100+81*3 ) page faults

The answer is (D)
4 votes

Optimal PRA(Page Replacement Algorithm) behaves like MRU PRA  when the sequence is repeated only in case, where the frames are empty.

Here, the frames are already initialized with 101 to 120. So, none of the given options are correct.

Answer:

## Related questions

19 votes
4 answers
1
2.3k views
Assume that there are $3$ page frames which are initially empty. If the page reference string is $\text{1, 2, 3, 4, 2, 1, 5, 3, 2, 4, 6}$ the number of page faults using the optimal replacement policy is__________.
51 votes
3 answers
2
8.9k views
Consider the main memory system that consists of $8$ memory modules attached to the system bus, which is one word wide. When a write request is made, the bus is occupied for $100$ nanoseconds (ns) by the data, address, and control signals. During the same $100$ ns, ... be on the bus at any time. The maximum number of stores (of one word each) that can be initiated in $1$ millisecond is ________
30 votes
4 answers
3
4k views
Three processes $A$, $B$ and $C$ each execute a loop of $100$ iterations. In each iteration of the loop, a process performs a single computation that requires $t_c$ CPU milliseconds and then initiates a single I/O operation that lasts for $t_{io}$ ... uses a time slice of $50$ milliseconds. The time in milliseconds at which process C would complete its first I/O operation is ___________.
28 votes
3 answers
4
5.1k views
Consider the procedure below for the Producer-Consumer problem which uses semaphores: semaphore n = 0; semaphore s = 1; void producer() { while(true) { produce(); semWait(s); addToBuffer(); semSignal(s); semSignal(n); } } void consumer() { while(true) { semWait(s) ... semaphore s when the buffer is empty. The starting value for the semaphore $n$ must be $1$ and not $0$ for deadlock-free operation.