5.2k views

The cube root of a natural number $n$ is defined as the largest natural number $m$ such that $(m^3 \leq n)$ . The complexity of computing the cube root of $n$ ($n$ is represented by binary notation) is

1. $O(n)$ but not $O(n^{0.5})$
2. $O(n^{0.5})$ but not $O((\log n)^k)$ for any constant $k>0$
3. $O((\log n)^k)$ for some constant $k>0$, but not $O( (\log \log n)^m)$ for any constant $m>0$
4. $O( (\log \log n)^k )$ for some constant $k > 0.5$, but not $O( (\log \log n)^{0.5} )$
edited | 5.2k views

We can simply do a binary search in the array of natural numbers from $1..n$ and check if the cube of the number matches $n$ (i.e., check if $a[i] * a[i] * a[i] == n$). This check takes $O(\log n)$ time and in the worst case we need to do the search $O(\log n)$ times. So, in this way we can find the cube root in $O(\log^2 n)$. So, options (A) and (B) are wrong.

Now, a number is represented in binary using $\log n$ bit. Since each bit is important in finding the cube root, any cube root finding algorithm must examine each bit at least once. This ensures that complexity of cube root finding algorithm cannot be lower than $\log n$. (It must be $\Omega \left( \log n \right)$). So,  (D) is also false and (C) is the correct answer.
edited by
0
Thanks.
+2
@Arjun sir. How is it logn^2. It should be logn only? 1...n we do binary search and each time we check a(i)*a(i)*a(i)=n or not and this is a constant time and it will be done logn times at max.Can you tell please how is it logn^2?
0
@air1

I think final complexity should be O(log3n)O(log3n)

EDIT: If we convert the binary to decimal in the beginning, then it will be O(logn)

Please explain how it becomes O(logn)?
+9
a == b? Usually we consider this as an $O(1)$ operation. But when $a$ is allowed to be arbitrarily large, this can take $O(\log a)$ as each bit needs to be checked. That is why the check is taking $O(\log n)$ in the given question.
+1
Sir in asymptotic analysis we dont bother about how long arithmetic operations take.It depends on h/w .

even when we check a==b in constant as you mentioned,there also a can be any large or small number and we need to check all bit,but we dont bother about that.I still did not get:(
+1
@Arjun sir, why do the binary search on the whole of n elements? Isn't it sufficient to do it only for the 1st n^1/3 elements? If so, then the time taken is also reduced to O(log n^1/3).
0

cant we do like this?

1) convert given binary representation of $n$ into decimal----$O(logn)$

2) then find $\left \lfloor n^{0.333} \right \rfloor$ --------------$O(1)$

total complexity $O(logn)$

@Arjun sir I have same doubt as above @rahul said.

Do we consider the underlying hardware complexity in asymptotic analysis of our algorithm?

0
i have the same doubt did u get the answer?
0
..
0
How did you get log^2(n) ? I got it we need log(n) for binary search, but why did you square it ?

Consider the below function:

int cuberoot(int n)
{
int crt;
for(int i =1; i<=n;i++)
{
if (i*i*i<=n)  crt=i;
else return(crt);
}
}

The above function will return the cube root of value 'n' as defined in question.

Now if n = 64, the for loop will run 5 times(i=1,2,3,4,5) O(logn).

But if we take larger value say n= 8192(i.e.2^13) then the for loop will run 21 times which is  (logn)^k , where k=1.1869

Therefore we can say that the complexity of computing cuberoot  will O((logn)^k) but not O(loglogn).

edited

Consider the array of natural numbers .

 00 01 10 11 100 101 110

Suppose we want to find the cube root of $6$ , $(n=6)$ to store in binary it takes 3-bits ($\left \lceil \log_2 n \right \rceil$)

take $m$ as middle element of the array.  (here $m=3$)

step 1 : Find middle element $m$ [ will take $O(1)$ time ]
step 2 : Find cube of m  [ will take $O(1)$ time ]
step 3 : Compare $m^{3} < n$ [ will take $\left \lceil \log_2 n \right \rceil$ time .  We need to compare $\left \lceil \log_2 n \right \rceil$ bits because of binary representation ]
step 4 : If there is match or nothing in array is left we return m else if compared value is grater than $m$ we go left of $m$ else we go right of $m$ loop from step 1

Running Time Complexity Of the Algorithm

• $\log n$  -> Implementing Binary Search
• $( \log n )^{k}$ -> Comparing Each bit of the number represented in binary notation where k is the number of loop iterations
• So on best case it will take $O(\log n)$ and worst case $O(\log^{k+1} n)$

Example

Iteration 1

1. $m=3$
2. $3^{3}=9$
3. $9 \leq 6$ False we go LEFT of the array [this is compared as $1001\leq 110$]

Iteration 2

1. $m=1$
2. $1^{3}=1$
3. $1\leq 6$ True we go RIGHT of the array [this is compared as $01\leq 110$]

Iteration 3

1. $m=2$
2. $2^{3}=8$
3. $8\leq 6$ False we go LEFT of the array [this is compared as $1000\leq 110$]
4. Since sonthing in LEFT of the array we return $2$ as it is the nearest cube root

Here we took $O(\log ^{4} n)$

[ @arjun sir can u pls check this one ]

edited by
0
$k = \log n$ rt?
0

@arjun sir ,

Actually What i Thought about upperbound complexity $O(\log^{k+1} n)$ is that

• Outer Loop  for implementing binary search will take $O( \log n)$ time
• inner loop for comparing each bit of $n$ for each iteration takes $O( \log n)$ each

Isn't the example correct ?

1.  $O(\log n)$ for implementing binary search
2. $O(\log n)$ for comparing bits of 9 and 6
3. $O(\log n)$ for comparing bits of 1 and 6
4. $O(\log n)$ for comparing bits of 8 and 6

Here k = number of iterarions . The loop executes for $\log n$ time hence $k=\log n$

Correct me if wrong...

0
You can count k rt? Also why you taking power and not multiply for getting the time complexity?
0
Multiplying a number 3 time , is const operation  That is why i took it as $O(1)$
0
But it varies with the input- not a constant.
0
See my answer now, there was a mistake which I corrected now.
+1
Got my mistake :)
This is wrong .
@arjun sir complexity will be always $O(\log^{2} n)$  ?
How does k counted ? will it affect the complexity ?
+4
yes, though I did not prove it. Complexity of multiplying 3 numbers of $\log n$ bits each. Normally we take this as $O(1)$ assuming CPU has a MUL instruction. For this question, we can assume such an instruction is not there.
0
Such a clear analysis. Thanx a lot sir.
0
While changing decimal to binary(in 1st case like 9 we will get so we r changing it to binary then comparing with desired binary no .) will not be considered in time complexity??

Just this doubt coming.
0
In question it is mentioned that (n is represented in binary notation).

BY USING LINEAR SEARCH:

algo(n)

{ for(i=1 to n^3)

if(i^3>n) return(i-1)

}

it takes n^(1/3) time

BY USING BINARY SEARCH:

(1)^3   (2)^3  3  (4)^3  5  6  7  (8)^3  9  10  11  12  13  14  15  (16)^3 ..........

it takes logn time

Here we  need to find upper and perhaps lower bounds on the complexity of finding an integer cube root m of n. At least one upper bound is trivial, and rules out answers A and B: m can be found in O(log n) time using binary search.

Also note that the input size is O(log n) because the minimum number of bits needed to represent an arbitrary n in binary notation is proportional to log n. Because all bits of the number must be processed to solve the problem, θ(log n) is a lower bound on the time to solve the problem, and therefore the problem cannot be solved in time O((log log n)^w) [where w is some constant > 0] because that isn't O(log n). Thus, answer C applies.

1
2