Transfer rate =2 *10^8 m/s

Time to transfer =(4*10^3)/(2*10^8)=2*10^-5 sec

Data rate = 10^7 bps

Packet size = 2*10^-5*10^7 bits = 200 bits

so its option D ....

The Gateway to Computer Science Excellence

+32 votes

Best answer

In CSMA/CD, to detect a collision the transmission time (which depends on the

packet size) must be greater than twice the propagation delay.

Propagation delay here = $\dfrac{2 km}{ 2 \times 10^8 m/s}=10 \text{ microseconds}$

Now, transmission time for $x$ bytes = $\dfrac{x \times 8}{10^7} = 0.8x\text{ microseconds}$

So, $0.8x > 2 \times 10 \implies x > 25 \text{ bytes}$

So, None of these.

Correct Answer: $D$

packet size) must be greater than twice the propagation delay.

Propagation delay here = $\dfrac{2 km}{ 2 \times 10^8 m/s}=10 \text{ microseconds}$

Now, transmission time for $x$ bytes = $\dfrac{x \times 8}{10^7} = 0.8x\text{ microseconds}$

So, $0.8x > 2 \times 10 \implies x > 25 \text{ bytes}$

So, None of these.

Correct Answer: $D$

+3

Total distance for RTT = 4 Km

Transfer rate =2 *10^8 m/s

Time to transfer =(4*10^3)/(2*10^8)=2*10^-5 sec

Data rate = 10^7 bps

Packet size = 2*10^-5*10^7 bits = 200 bits

so its option D ....

Transfer rate =2 *10^8 m/s

Time to transfer =(4*10^3)/(2*10^8)=2*10^-5 sec

Data rate = 10^7 bps

Packet size = 2*10^-5*10^7 bits = 200 bits

so its option D ....

0

(doubt) yes the packet size ahould be 25 bytes, but question says what could be minimum size .

a packet should be equal to or more than 25bytes so can't we say 50 bytes(option a) is fulfilling the question criteria?

a packet should be equal to or more than 25bytes so can't we say 50 bytes(option a) is fulfilling the question criteria?

0

@skyby

50B is valid but it is not **minimum**.

but if it is asking minimum from the options then 50B is correct.

0

well that's quite dependent on how we interpret question in one go during Exam, anyway thanks for clearing it

0

Sir,Why we are not adding jamming signal 32 bits long when collision occurs .i.e

**Tx**** of frame = 2*propogation time+ Tx of Jamming Signal** in this question it is not mention about jamming signal but whenever collision occurs jammming signal is generated

Similar type of question is asked in Gate 2005 https://gateoverflow.in/1397/gate2005-74 but in that jamming signal was mentioned in the question

+7 votes

For CSMA/CD Protocol formula of minimum packet size

L >= 2*T_{p}*B

where B is the bandwidth and T_{p} is the propagation delay which is D/V D is the distance and V is the velocity that signal travels through the wire so by putting all these values we get that L>= 200 bits which is L>= 25 bytes

Ans D

+6 votes

RTT = 2 * Propagation Time

Transmission Time = Length of packet / Bandwidth

RTT = 2 (d/v) = 2(2000/2×10^{8})

Therefore to find minimum size of the packet,

RTT <= Length of packet / Bandwidth

Length of packet >= RTT x Bandwidth

= 2(2000/2×10^{8}) x 10^{7} = 200bits = 25bytes

Therefore, minimum size of the packet = 25bytes

0 votes

L/B=2D/V ( we are using 2 because we want minimum packet size)

L=(2*B*D)/V

2*(10^7)/8 * 2000/2*10^8

=>25 bytes

so the answer is D

L=(2*B*D)/V

2*(10^7)/8 * 2000/2*10^8

=>25 bytes

so the answer is D

–5 votes

Lets explore the answer

As we know:

**TT = framesize/Bandwidth;**

and minimum time taken to acquire the line is = 2*pt

TT = 2*pt

min frame size = 2*pt*b.w;

**=200 bits(C)**

- All categories
- General Aptitude 1.9k
- Engineering Mathematics 7.6k
- Digital Logic 2.9k
- Programming and DS 4.9k
- Algorithms 4.4k
- Theory of Computation 6.2k
- Compiler Design 2.1k
- Databases 4.1k
- CO and Architecture 3.4k
- Computer Networks 4.2k
- Non GATE 1.4k
- Others 1.5k
- Admissions 595
- Exam Queries 573
- Tier 1 Placement Questions 23
- Job Queries 72
- Projects 18

50,834 questions

57,838 answers

199,509 comments

108,337 users